There is something special about a handmade piece.
Unlike a mass-produced product, no two pieces of handcrafted concrete will ever be exactly the same. Subtle variations in colour, texture, tone and surface finish are part of the process — and, in our opinion, part of what makes handmade concrete so beautiful.
But we also understand that if you are new to concrete, some of these characteristics can be unexpected. You might notice a tiny pinhole in the surface. Perhaps there is a slight variation in colour or a small tonal change across the piece. You may see a subtle mark left behind from the moulding or finishing process.
So, what is normal?
And when does an imperfection become a problem?
Concrete isn’t plastic — and that’s a good thing
One of the reasons people are drawn to concrete is because it doesn’t look manufactured.
Concrete has depth, texture and variation. It responds to the materials used, the mould, the casting process, curing conditions and the way the surface is finished. Even when we use the same mix design, pigments, moulds and techniques, the finished pieces can have subtle differences. That’s because we aren’t producing identical objects on a factory production line. We are making them by hand. For us, that individuality is one of the defining characteristics of artisan concrete.
What are pinholes?
Pinholes are one of the most common questions we receive.
They are small air voids that can sometimes remain at or just below the surface of a cast concrete piece. Concrete is a mixture of cement, aggregates, water and, depending on the product, various additives and pigments. During casting, tiny pockets of air can become trapped against the mould surface.
We use careful casting and finishing techniques to minimise these voids, but it is not always possible to eliminate every single one.
A perfectly smooth-looking surface doesn’t necessarily mean that the concrete contains no microscopic air voids — and a small number of visible pinholes does not necessarily indicate a problem with the strength or integrity of the piece.
In fact, those tiny variations can be part of the visual character of handmade concrete.
Colour variation is part of the process
Another characteristic that can surprise people is colour variation. Concrete is not a flat, uniform material. Even when a particular colour has been carefully developed and reproduced across a range of products, there can be subtle differences in tone and shading.
The final colour can be influenced by factors such as the raw materials, pigment dispersion, moisture content, curing and finishing. Natural-looking movement across a surface can give concrete considerably more depth than a completely uniform manufactured finish.
This is particularly important when choosing a handmade concrete product: the piece you receive may not look pixel-for-pixel identical to a photograph on a screen. And that’s not a flaw. It’s part of owning something that has been individually made rather than mass-produced.
Handmade doesn’t mean imperfect workmanship
There is an important distinction we’d like to make.
When we talk about celebrating imperfection, we aren’t talking about accepting poor-quality workmanship. There is a difference between a natural characteristic of handmade concrete and a genuine manufacturing defect. A subtle variation in colour, a small pinhole or minor tonal movement may be an inherent part of the material and manufacturing process. A structural crack, significant surface defect or problem caused by incorrect manufacture is something entirely different. Our aim is not simply to make something and call every imperfection “character”. Our aim is to produce high-quality concrete pieces using careful processes, while recognising that the material itself has an element of unpredictability.
Why we think that’s something worth celebrating
There is a growing appreciation for handmade objects because they feel different from the perfectly uniform products that surround us. A handmade concrete piece carries evidence of its material and its making.
It might have a slightly different tone from another piece. Its surface may contain tiny variations. The edges and texture may have their own subtle character.
Those details tell you that the object wasn’t simply stamped out by a machine. It was made. And that’s something we think is worth celebrating.
What should you expect when you order handmade concrete from Concrete Creations?
Our goal is to make sure you know what you’re getting before you place an order.
When you purchase a handmade concrete piece from Concrete Creations, you should expect a product that has been carefully made and finished, but not one that is necessarily completely uniform or identical to every other piece.
You may see:
- Small pinholes or air voids
- Subtle variations in colour and tone
- Natural movement across the surface
- Minor variations resulting from the casting and finishing process
- Small differences between individual handmade pieces
These characteristics are part of the nature of the material and the handmade process.
If you are looking for a perfectly uniform, completely machine-made surface, handmade concrete may not be the right material for you. But if you appreciate the character of natural materials, the individuality of handmade objects and the small details that make one piece different from another, we think you’ll appreciate what concrete has to offer.
Every piece has its own story
One of the things we love most about working with concrete is that, despite our experience and attention to detail, the material always retains a little of its own personality.
We can control the process. We can carefully select our materials, develop our mixes, prepare our moulds, control our finishing techniques and take great care throughout production. But we don’t try to remove every trace of the handmade process. Because the goal isn’t to make every piece identical. It’s to make every piece well… and sometimes, the tiny details that make it different are exactly what make it special.


